Hey guys, just got the MC6 MKII to use with HX stomp. I set up everything like this.
A:Snapshot1
B:Snapshot2
C:Snapshot3
D:Snapshot3 with Drive,Delay,Boost turned on (those CC actions are AFTER snapshot CC of course)
Drive Delay and Boost block bypasses are also assigned on HX footswitches so that they can be turned on/off individually.
The problem is when I step on button “D” HX Stomp will not turn on the LED rings, even though on the screen the 3 blocks MC6 is set to enable are turned on properly. It’s just that the LED rings do not refresh and stay off. (Sometimes on hitting the switch one will randomly turn on, sometimes none) Is this a known issue? Any workarounds?
If my post is confusing I could provide pics for more clarity. Thanks!!
I just remembered there is a problem with the Stomp, midi and LEDs. You can find a discussion of the issue here -
https://www.thegearpage.net/board/index.php?posts/29524319/
Never mind, restarting stomp and disconnecting all usb cables fixed the problem. Now all is working properly. Thank you for the thread though!