ive set some Rig in browser mode on midi PrgChg#2 and I set program changing on MC6 also number 2, But the odd is like mc6 sent midi PC #3 instead #2 and so on , like (n+1 )
The Program Change numbers displayed in the Profiler's user interface range from 1 to 128 and are incremented by +1 versus the real 7-bit values received, which range from 0 to 127. Many MIDI controllers are flexible to apply a reverse logic (display number n, transmit number n-1). If your MIDI controller is set to a fixed 0-127 range, your only option is to use another bank (e.g. starting from PC#10) and set your Profiler MIDI assignments appropriate
does it mean I have to assign rig with pc number start from #10 to fixed this ?.
Hi Irfan, can you share some screenshots of your settings? Also, can you check www.midimonitor.com and see if the messages are coming out as expected?
ive Check with midi monitor the the messages number is correct , does it mean the problem is on kemper side ?
I Have read somewhre in the net
http://foobazaar.com/wikpa/index.php?title=MIDI
Program change mismatches
The Program Change numbers displayed in the Profiler's user interface range from 1 to 128 and are incremented by +1 versus the real 7-bit values received, which range from 0 to 127. Many MIDI controllers are flexible to apply a reverse logic (display number n, transmit number n-1). If your MIDI controller is set to a fixed 0-127 range, your only option is to use another bank (e.g. starting from PC#10) and set your Profiler MIDI assignments appropriate
does it mean I have to assign rig with pc number start from #10 to fixed this ?.