As I use the MC6 on a guitar pedalboard with a cover band, I'd like to have a bank per song, so 30 banks is not enough !
Would it be possible to have over 30 banks available, and maybe a bank limit for those who don't need so much.
It would be nice to be able to clear the Midi Monitor messages. I realize the messages are sequenced and time stamped but being able to clear the display would just it so much easier to see what is going on.
As the MC6 Editor now allows the modification of bank specific behaviour, for example changing the status of Clear Preset Toggles, it would be really useful to be able to configure a set of messages that are sent when a bank is selected. The bank entry facility would be somewhat analogous to a constructor method in object-oriented programming in that the associated commands would only be sent the once when selecting the bank. The main purpose of the facility would be to coordinate a set of actions on a device, or devices, when selecting a bank. For example, to select a preset and configure an option on one device, select a preset on another device, and so on. MSG1 - Type: Program Change, Value: PC Number: 2, Channel: 1 MSG2 - Type: Control Change, CC Number:69 , CC Value 2, Channel: 1 MSG3 - Type: Program Change, Value: PC Number: 4, Channel: 2 MSG4 - Type: Program Change, Value: PC Number: 12, Channel: 3 The desire to see this kind of facility has been expressed by a number of different people and would be not only appreciated but a powerful addition to MC6 functionality. ** If it’s the case that implementing this feature for on-device editing is difficult and cumbersome maybe it’s a facility that would reserved for configuration using the MC6 Editor. One of the main attractions of the MC6 is being able to use the editor on a computer and I don’t think most people would object to living with that being a restriction.
I have a couple MeloAudio EXP-001's that I have had to kludge together a ring/tip swap box for, since they put the wiper out on the ring. It would be nice to be able to swap where the MC6 reads the wiper via the settings. I would be able to ditch the extra box on the pedal board. Not sure if this is a hardwired limitation into the microcontroller, or if it could be firmware configurable.